Using the KVM over IP Device

From CyberWurx Customer Wiki

Revision as of 16:33, 29 January 2008 by Cwadmin (Talk | contribs)
Jump to: navigation, search

Contents

Obtaining an IPKVM

If you would like an IPKVM installed on your system, write the support department.

How to Use my IPKVM

If you obtained the IPKVM function on your server here are the instructions on logging in in a few simple steps.

Before you begin, make sure you have logged into the customer center.

Step 1

Verify you have the IPKVM enabled for your account. You should see an option under Services if it is in fact enabled.

Figure 2.1 - Where to look for the kvm
Figure 2.1 - Where to look for the kvm

The KVM will show up under services like Figure 2.1 shows.

Simply click on the IP KVM icon and proceed to step 2.







Step 2

Now you are inside your IP KVM management page. Usually you will only see one device listed here. If you have more than one you will see each one here.

Figure 2.2 - KVM managment.
Figure 2.2 - KVM managment.

You would simply click Launch management for access to the KVM.







Step 3

Log in with your customer center credentials and proceed to the kvm screen.

Figure 2.3 - KVM login
Figure 2.3 - KVM login
Figure 2.3.1 - KVM Home Screen
Figure 2.3.1 - KVM Home Screen
Personal tools